RLT BACTDET 05

Out of stock
Only %1 left
SKU
RLT BACTDET 05
RLT Bactdet 05 Sterilising Solution is used for killing and removing mould off contaminated surfaces. read more

Enquire about this product

Fast delivery available
Tested & verified products
Over 50 years experience

Need some advice? Please call us on 01372 743 334

We’re open 9:00am - 5:00pm Mon-Fri

RLT Bactdet 05 Sterilising Solution is used for killing and removing mould off contaminated surfaces.

Wash down mould infected surfaces with RLT BACTDET 05 diluted with 4 parts of warm water using a brush, sponge or cloth.  Extend treatment one metre in all directions beyond all visible signs of infection.  When the solution becomes dirty make up a fresh one.  Coverage must not exceed 10 square metres per diluted litre. 

To affected carpets, roll back carpet and wash down floor surface with RLT BACTDET 05 solution.  Spray the underside of carpets with RLT CLEARMOULD SPRAY and allow to fully dry before re-laying.

Wash down wallpapered surfaces with RLT BACTDET 05 solution prior to stripping.  Bag up wallpaper, seal and remove from the premises immediately.  Wash infected area again with a clean solution of RLT BACTDET 05. This stage is essential as RLT BACTDET 05 will kill all mould spores and prevent them spreading to other areas.

All preparation work must be done before the barrier, RLT HALOPHEN, has been applied. Prepare surfaces in accordance with good trade practice.  Scrape off all loose or flaking paint and rub down to a sound surface. Etch previously gloss painted surfaces with glasspaper to form a key.

Would you like to find out more technical information?