MGC Mould Eradication Kit

In stock
SKU
20037
The Mould Eradication Kit is a compact treatment with everything required to deal with small outbreaks of black mould.     read more

Enquire about this product

Fast delivery available
Tested & verified products
Over 50 years experience

Need some advice? Please call us on 01372 743 334

We’re open 9:00am - 5:00pm Mon-Fri

The Mould Eradication Kit is a compact treatment with everything required to deal with small outbreaks of black mould.  It contains RLT Bactdet 05, RLT Halophen, MGC Fungicidal Additives, mixing bucket, sponge, gloves, goggles and brush, there are sufficient materials for 10-122m of mould.  All the fungicidal products in the MEK are approved under COPR 1986 (as amended) by the Health and Safety Executive for both amateur and professional use and have been extensively used by Local Authorities, Housing Associations, private landlords and home owners for over 50 years for solving mould problems.

Contents

This kit contains the following...

  • 1 x RLT BACTDET 05 200 mls
  • 1 x RLT HALOPHEN 200 mls
  • 2 x MGC FUNGICIDAL ADDITIVES 50 mls
  • 1 x PAIR OF GLOVES
  • 1 x SAFETY GOGGLES
  • 1 x PAINT BRUSH
  • 1 x CLEANING SPONGE
  • 1 x MIXING BUCKET
  • INSTRUCTION LEAFLET

RLT BACTDET is used to kill the mould and remove from the contaminated surfaces.  Dilute at 1:4 with warm water and apply using the sponge or a clean cloth or brush extending the treatment one metre beyond the infected area.  Wallpapered surfaces must be washed prior to stripping to prevent the mould spores from spreading throughout the property.  After the wallpaper has been removed, wash the infected area again.

Carry out all preparation work before proceeding to the next stage.

RLT HALOPHEN is the most important part of the treatment.  Dilute 1:4 with warm water and apply one coat by brush to the previously contaminated area, extending the treatment one metre beyond visible signs of infection.  RLT HALOPHEN will penetrate into the substrate killing the roots of the mould and setting up a permanent barrier to prevent them from regerminating.  Allow to dry before proceeding with decoration.

DECORATION

MGC FUNGICIDAL ADDITIVES are specially formulated to protect the decoration from mould attack.  They can be incorporated into emulsion paint, primers, undercoats and gloss paint, plus wallpaper paste, size, textured paints and grout.

Directions

MGC Fungicidal Additive:

  1. Add the contents of one MGC FUNGICIDAL ADDITIVE to each 2½ litres of emulsion paint, wallpaper paste or size.
  2. Add the contents of one MGC FUNGICIDAL ADDITIVE to each 5 litres of primer, undercoat or gloss finish.
  3. Thoroughly stir materials after adding contents of MGC FUNGICIDAL ADDITIVE.

The Mould Eradication Kit is a compact mould treatment which successfully deals with small to medium contamination of mould growth.

RLT Bactdet 05:

Step 1: Empty the RLT Bactdet 05 into the container and make up to one litre with warm water. Take the sponge or a cleaning cloth or brush and wash off the mould. Allow surface to dry before proceeding.

Note: Wallpaper surface must be washed prior to stripping. After wallpaper has been removed the infected area must be washed again. All wallpaper removed should be bagged, sealed and taken from the premises immediately. 

Step 2: Prepare surfaces, scrape off all loose or flaking paint and rub down. Previously painted surfaces must be etched using sandpaper or similar, before proceeding with Step 3. 

Step 3: Empty RLT Halophen into the container and make up to one litre with water and apply to the dry wall and ceiling surfaces. Apply using the brush provided and allow to dry before decorating. 

All areas of wall and ceiling surfaces must be treated with RLT Halophen where RLT Bactdet 05 has been used. 

MGC Fungicidal Additives are specially formulated to protect the decoration from mould attack. They can be incoporated into Emulsion Paint, Primers, Undercoats adn Gloss Paint, plus Wallpaper Paste, Size, Textured Paint and Grout. 

Step 4: Add the content of one MGC Fungicidal Additive to each 21/2 litres of Emulsion Paint, Wallpaper Paste or size.

Add the contents of one MGC Fungicidal Additive to each 5 litres of Primer, Undercoat or Gloss Finish.

Thoroughly stir materials after adding cotents of MGC Fungicidal Additive.

RLT Halophen

Step 1: Dilute solution 1:4 with clean water.  Apply by brush to the affected area extending to a metre beyond all visible signs.  The coverage must not exceed 10 square meters per diluted litre.

Step 2: Brush RLT HALOPHEN will in for maximum penetration. Pay special attention to corners and junctions.

Step 3: In areas of heavy infection apply a second coat and allow to dry before proceeding with decoration.

Would you like to find out more technical information?